|
Model
|
WI100-30*
|
WI100-50* | WI100-85* | WI100-120* | |
| Measurement method | Diffuse reflection | ||||
| Measurement center distance | 30mm | 50mm | 85mm | 120mm | |
| Measurement range | ±5mm | ±10mm | ±20mm | ±60mm | |
| Repeatability accuracy | 1μm | 4μm | 8μm | 24μm | |
| Sampling period | 200μs/300μs/500μs/1ms/2ms/5ms | ||||
| linearity | ±0.1%F.S | ||||
| Temperature Characteristics | ±0.08%F.S./℃ | ||||
| light source | Red laser diode (wavelength 655nm) | ||||
| Spot size | 60x100um | 80x140um | 100x170um | 120x180um | |
| Power supply voltage | DC12~24V(+10%) | ||||
| Current consumption | ≤100mA | ||||
|
Analog output: voltage Analog output: current |
Voltage output: 0-10V, output impedance below 1000
Current output: 4-20mA, load impedance: below 3000
Note 1: Pay attention to the model
|
||||
| Controlled output |
<NPN setting>
Maximum incoming current: 50mA
External voltage: DC3-24V
Remaining voltage: below 2V (when input current is 50mA) Leakage current: below 0.1mA
|
<PNP Setting>
Maximum incoming current: 50mA
External voltage: below 2.8V (when the output current is 50mA)
Leakage current: below 0.1mA
|
|||
| Digital output | RS-485, Baud rate: 9600/19200/38400/115200 (default)/230400/460800/921600 bits/ | ||||
| Output action | Open circuit/closed circuit when ON (output action); switchable | ||||
| Display screen | OLED screen (128x36 pixels) | ||||
| Protection level | IP64 | ||||
| Environmental illumination | Incandescent lamp: light receiving surface illumination below 3000Lux | ||||
| Working Temperature/humidity | 0~+50°℃/35~85%RH | ||||
| Storage Temperature/humidity | -20~+60℃/35~85%RH | ||||
| Anti-vibration | Durability frequency: 10~55Hz, 1.5mm X, Y, Z direction for 2 hours each | ||||
| Impact-resistant | 300m/S2, three times in each of the six directions (up and down, left and right, front and back) | ||||
| Warm-up time | ≤20min | ||||
| Cable | About 2 meters | ||||
| Weight | About 150g (including tail line) | ||||
| Applicable standard | EMC Directive Applicable | ||||